A Guide to UHF Television Reception

Contact Author One ear up, one ear down. Source Why do some bunnies have ears that point straight up and other rabbits have ears that flop over? A hubber recently had this curious question to ask: Why do one of my bunnies ears stay fallen over? None of his brothers have ears like that it’s a netherland mixed with flemish giant and it is the only rabbit with one ear that will not stay up. It is difficult to answer this question with complete confidence simply because we do not truly know the breeding of the rabbits in question. If the rabbits have been bred in a home environment, or purchased from a pet store for breeding, it is highly likely that you do not have pure Flemish Giant or pure Netherland rabbit genes in the mix. What does that mean? It could mean that some lop genes have snuck into the gene pool somewhere and expressed themselves in this one little rabbit. Rabbits whose ears flop over are referred to as ‘lops’.

Digital TV Ears not working on new Samsung LED smart TV

How to convert your old TV to receive digital TV over the air. Now that you want to convert your old tv to digital, there are a few things you need to know. We will also make recommendations taken from well known reviews such as Consumer Reports. The Reason for DTV. Digital television provides a clearer picture and more programming but also does it more efficiently, using less of the airwaves.

Before , rabbit ears and even large, rooftop antennas were not uncommon sights in American households. These inefficient metal monstrosities grabbed over-the-air, or OTA, television signals.

A new VCR would be cheaper than figuring this out. But anyway, I’ll proceed with the comments in the order you present the info I have a digital cable box General Instrument brand name, received with Comcast dig. I assume that what you want to watch is on a VHF channel. If it is not, take the UHF channel number, add 51 to it, and search for the channel by the resulting number.

This works up to about 90 and gets a bit off after that. Yes I realize the absurdity of it, but I just want to do it for now, I am getting satellite in the not-too-distant future and want to watch some Monday Night Football I cannot figure out the correct way to do this, there are a few settings in the menu function on the digital box, namely; AC Outlet and RF Bypass.

AC outlet has to do with whether the AC outlet on the back of the box is live all the time, or turns on and off with the cable box. This is so you can use the cable remote to turn the TV on. RF Bypass chooses either to let the entire cable spectrum go out the OUT F connector on the back, or to have only the chosen cable channel go out as channel 3. This is irrelevant to you as you want to use the line outputs RCA jacks.

Do I need to do anything to these to make it work, but more importantly, where do I plug the ‘out’ from the antenna to the cable box? The ‘out’ from the antenna gets plugged into the ‘in’ on the cable box. It is typical of all but the most confused equipment that the ‘out’ of one device has a signal going out of it, so when the other end of the cable is at the destination box, one expects the signal to go in there, so it is connected to the ‘in.

How to Attach Rabbit Ears to a HDTV

It looks like portions of our site are being blocked! Check your browser settings or contact your network administrator. As of October , Consumerist is no longer producing new content, but feel free to browse through our archives. Here you can find 12 years worth of articles on everything from how to avoid dodgy scams to writing an effective complaint letter.

Check out some of our greatest hits below, explore the categories listed on the left-hand side of the page, or head to CR.

Since they are new technology (not to mention well-stocked with encrpytion and other copy protection rigamorale), it’s probably worthwhile to explain how to hook them up. The old TV “rabbit ears” have been widely replaced by cable and satellite services.

Well GT brain trusts My wife and I have this crazy idea We were wondering if we could ditch our cable company Comcast and hook a computer up to our TV and watch shows over the Internet?? Not crazy, I’ve already done this. Also if we had rabbit ears we could we watch local channels via this system?? So we might need a new TV???

RCA ANT111Z HDTV and FM Antenna Rabbit Ears Design

Pay attention to the way your corset is tied when you receive it, this is the way you will tie it when you put your corset on. The corset is laced using “rabbit ears”. The lacing is one continuous piece with long loops in the center that are what you will use to tie in the center back.

See More: hook up an antenna to a toshiba big screen. As far as the antenna, unless you live out in the boonies you don’t need anything fancy–an old pair of rabbit ears will work just fine. As already mentioned, you need to find out if your TV is digital-ready. If it is then all you need is the antenna and maybe an adapter to connect it to.

This wikiHow teaches you how to select and set up an antenna for your TV. Steps Preparing to Connect 1 Determine your television’s antenna connector type. Virtually every TV has an antenna input on the back or side; this is where you’ll plug in the antenna. There are two main versions of this input: Coaxial RF – Resembles a threaded cylinder with a hole in the middle.

This type of connector is the standard for most modern TVs. IEC – Resembles a smooth cylinder with a smaller cylinder inside of it. Check your TV’s manual or look up its model number online to double-check the antenna type. You can typically do this by typing in your location and “tv broadcast station” into Google. This will give you an idea of the type of antenna that you’ll need; for example, if the closest station is relatively far away, a standard set of “rabbit ears” won’t be ideal.

You can also enter your address into a site like http:

How to Install TV Ears

Mar 24, , 7: How do I hook-up the transmitter and what chanel do I use? Hope you can help me.

HOW HARD IS IT TO HOOK UP A CONVERTER BOX? Most people should be able to hook them up by just following the directions. If you have tried and still can’t get If you are using rabbit ears, move them to a different location, preferably close to a window. When all else fails, call someone associated with the TV District and ask for help.

Steve Waltke is an engineer who lives in Michigan. He enjoys do-it-yourself projects around the house. He concluded that what he learned from one of his recent activities might prove useful to others who still use rabbit ears or an antenna for television reception. This is what he says: After doing research and setting up several digital TV conversion boxes, I thought I would share what I have learned about setting up equipment for receiving digital television broadcasts.

If you are using rabbit ears or an exterior antenna with your TV, you may find this information essential. By federal law, starting in February , all commercial television stations must stop transmitting the old-fashioned analog way, and must begin to broadcast using digital format, so, if you want to continue watching TV, you will have to go digital. This article explains how to go digital as inexpensively and easily as possible.

Each coupon can be given to a retail store as partial payment for a single digital conversion box. It is important to remember that the coupon expires ninety days after it is sent to you. Also no replacement is available for lost or unused expired coupons. If you make your request by phone, the process is completed by a relatively capable, high-quality automated voice-recognition system.

At the end the system will tell you the approximate date you will receive your coupon by mail.

How to Tie a Corset on Your Own (With 3 Easy Options!)

Email For two generations, the “rabbit ears” antenna has been the symbol for the way we get TV signals from the ether into our television sets. Even TiVo’s icon has them. But analog broadcast television is going away in early , and those rabbit ears will be next to useless — not that they’ve ever been all that good. In the upcoming world of digital broadcast television, you’ll still get your local stations over the air, but if you don’t have cable or a satellite dish, you’ll need something better to pull in that signal.

Pinnacle’s USB-based TV for Mac HD Mini Stick which also works on a PC comes with a single-masted extendable antenna as well as a connector to hook it up to an unlocked cable input one that doesn’t require a set-top box. The system brings broad digital television functionality to your Mac or PC.

If you only have a set of rabbit ears trying to pick up a signal can be hard. This is especially the case with digital where you get either a solid picture or no picture at all.

I’m sitting here shaking my head. Nothing on this post makes much sense. It doesn’t matter which room of the house the television is located in, it is still a television and the laws of physic’s doesn’t change, no matter what room it is in or what kind of television it is. The first indication of good reception is due to the fact that there are a bunch of stations within 20 miles or so of his location. Now we get into the wiring of the house. Someone here missed the point – when this person said – he tried to hook his television up directly to the dish.

There is no way you could hook up a television to a sat dish and expect it to receive any OTA signals. Which ever wire had a dead short on the other end would be the wire you dead shorted. If there was more than one wire dead shorted, then either they are connected to some kind of splitter or the wire is junk. The next point is – you cannot connect rabbit ears antennas to a F terminal and expect it to produce a good television signal.

There is a lot of afroamerican engineering going on here. The signals are also in two different directions.

What Makes Rabbit Ears Go Floppy?

Since then, many people have switched to HDTV. But a significant portion of the population elects not to buy a cable or satellite package. These viewers are content with the standard broadcast channels available in their area.

Nov 21,  · Posted By: brobox on 11/20/11 pm Yes, however if the receiver locks up from rain fade, it also locks up the antenna. I had to hook the Antenna up to the TV to be able to watch antenna TV during rain storms.

Welcome to Ask Me Fast! TV rabbit ears are intended for indoor use. However, in many cases they can receive a signal that is just as clear as an outdoor antenna. These antennas can pick up signals broadcast by TV stations in your area. This is a way of piping free local television programming into your home. But first you have to buy a digital converter box. The cable simply screws onto the coaxial input on your television and the coaxial output on the back of the converter box.

Screw the coaxial cable attached to your rabbit ears to the “Antenna IN” input on the back of the digital converter box.

Clear TV Digital HD Antenna Plugs Into Any TV in Seconds!

The Basics of Home Theater: If you’ve come this far, odds are that you either have some new electronic toys in hand or are seriously considering the purchase of some. That means that it’s about time to start hooking everything up. This stage is often particularly challenging for people who are new to home theater, so I’ve endeavored to provide some handy reference material here. Originally, I tried to show complete systems of varying complexity.

Rabbit ears are cheap. Strap them to your chimney, or climb a tree and place them carefully according to the reception data your friend yells out the window to you. Rabbit ears are not intended to be placed outside, as they will deteriorate to the point of uselessness.

After hooking up a converter box to your analog TV set, you will need to scan also known as “auto-tune” for new channels to ensure you receive all of the digital stations broadcasting in your area. While some boxes do this automatically, you may need to select scan manually. You should rescan on a periodic basis to get all of the digital programming available. How do I Perform a Channel Scan? Run the “scan” function on your converter box, usually on the remote control, labeled “set-up” or “menu” or some similar term.

Once the scan is complete, you should be receiving digital channels through your antenna or rabbit ears. If you run a channel scan and are still having difficulty, we recommend you use the DTV Coverage Map to see what stations you should be receiving in your area. If rescanning doesn’t help, you may need to double scan.

Free TV Comparing GE Rabbit Ears Indoor TV Antenna to GE Model 24804 Indoor TV Antenna